Antique style dining table legs, anybody tried this on SO3 XL?

[Griff (Well crap, my hypometric precursor device is blown…)]

Thinking about attempting an extendable antique style dining table. Early in the research phase so thought I’d ask the community. Maybe, possibly, something like/ similar to this:

Or possibly Queen Anne style? Just thinking right now.

[WillAdams (William Adams (Carbide 3D))]

You’ll want to set up a version of a 4-sided fixture at a minimum to do the legs:

4 Sided Flip Frame Prototype

This is a design I made using Carbide Create for a 4 sided Jig that fits in the Carbide 3D Low profile vise channel, and allows 4 sided rotation. This design allows for a 3.25" long and 1.6" round part to be machined on 4 sides. [image] The Set screws that hold the stock conveniently sit inside the middle channel so if they stick out there is clearance. I have include the Carbide Create file below. Materials used: 2" x 2"x 5" aluminum tube with 3/16th walls. M6 Set screws 10mm- 16mm 1/8…

[Griff (Well crap, my hypometric precursor device is blown…)]

Hmmm, lota work there, maybe someday. I’m thinking I can do a 4 part glue up maybe. Or, I found some oak Queen Anne style on eBay, 4 for $30 , crazy.