In general, if the bit is chattering should the feed rates be lowered and/or the RPM increased?
We have a bit on that on the wiki: https://www.shapeoko.com/wiki/index.php/Operation_Troubleshooting#Bit_Chatter
Feed rate too high, lowering it is the suggestion there — assuming your machine checks out per http://docs.carbide3d.com/general-faq/machine-operating-checklist/
Thanks Will. I suppose there is just a bunch of testing/playing that needs to be done to find the sweet spots.
1 Like
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.