I finally have my machine together and I can’t get it to home.I keep getting an error stating that there is a blockage or a homing sensor failure. Wiped down and checked all sensors and they light up.I then cleaned and oiled all the tracks and ball screws and I checked all the wiring throughout my machine. I even reset the machine and nothing. It won’t even get past the x axis in the homing sequence. Can someone chime in on this? I’ve seen a few posts similar to mine and haven’t seen an actual answer or fix for this.
Please write in to support@carbide3d.com — the folks there should be able to assist.
This topic was automatically closed after 30 days. New replies are no longer allowed.