A box of a different size

[WillAdams (William Adams (Carbide 3D))]

Lastly, the lid has to be set up — see:

Using unsupported tooling in Carbide Create: Roundover / Cove / Radius bits

Once the geometry which we wish to use is drawn up: [image] we position various V endmills relative to it: [image] and then draw the line for the contour toolpaths: [image] and create a group for the V endmill toolpaths: [image] and then assign the various V endmill toolpaths cutting to the appropriate depths: [image] until one arrives at: [image]

for how this would be done.