Carbide Create (520) Send to Machine not working

[WillAdams (William Adams (Carbide 3D))]

I wrote up a bit on this at:

Carbide Create - Send to Motion feature

This is an inobvious feature which has undergone a change in recent versions — it now allows sending a file from one computer running Carbide Create to Carbide Motion running on a different computer over the network (it also works on the same computer using the 127.0.0.1 loopback) Testing with Carbide Create 520 and Carbide Motion 536. Note that it is necessary when installing/running Carbide Motion to grant it network access. First, in Carbide Motion enable the “Allow Remote Access” option un…

It seems to still be in a testing phase.

I’ve been getting some incomplete file transfers, so always check if the transfer is complete.