Carbide motion for V2.4e

[julien380 (vairai)]

Bonjour a tous j ai une carte V2.4e sur ma shapeoko xxl et un ordinateur avec windows10 . J ai telecharger carbide mation 521mais il ne reconnait pas la carte v2.4e

[WillAdams (William Adams (Carbide 3D))]

Please accept my apologies, my one year and one day of High School French is not up to responding in your native tongue.

If Carbide Motion doesn’t run on your board it’s because you have Grbl 0.9 rather than 1.1

You can get Carbide Motion 3 which supports Grbl 0.9 from:

https://carbide3d.com/downloads/

If you have (or wish to upgrade to have) homing switches and have a 64-bit computer you can update to Grbl 1.1 — just e-mail us at support@carbide3d.com

If that’s not it, let us know at support@carbide3d.com

[julien380 (vairai)]

merci pour votre reponse je telecharge en ce moment le 368 pour faire un essai comment passer du coup au GRBL1.1 ?

[WillAdams (William Adams (Carbide 3D))]

If you have (or wish to upgrade to have) homing switches and have a 64-bit computer you can update to Grbl 1.1 — just e-mail us at support@carbide3d.com — we’ll provide a link or see:

GRBL 1.1 and Carbide Motion 4

Here’s a link to the first builds of GRBL 1.1 and CM4. It’s not what we’d call “done” but it works well and we want to get it in the hands of some of our more brave users. DON’T UPGRADE IF YOU ARE USING YOUR MACHINE FOR PRODUCTION OR CANNOT RISK HAVING YOUR MACHINE DOWN WHILE WE WORK THROUGH THIS VERY EARLY RELEASE This update is good for all Carbide 3D machines. Shapeokos must have homing switches though. If you have any problems, please send them to beta@carbide3d.com so we can open a t…

[Radiation (Josh)]

Hopefully @Julien can help with the translation if needed: https://docs.carbide3d.com/support/carbideupdater/
Edit: Hah, beaten by Will

[Julien]

It looks like I’m late to the party but,

@julien380: si les instructions fournies par Will ne sont pas suffisamment claires n’hésite pas à me demander (via message privé pour éviter d’imposer des posts en français à nos amis anglophones), je ferai de mon mieux pour te répondre.