Design into 3D project live on Kickstarter

[WillAdams (William Adams (Carbide 3D))]

Thanks! I put one of those up at:

CNC Box (Finger) Joint Box

Managed to get two sets of parts cut: [WIN_20180911_22_41_11_Pro] Which shows more or less how it ought to work. Not included in the photo are three additional boards (all four would be cut at the same time) and a front cross bar which the two F-clamps would hold in place to clamp the four boards, and a set of adjustable clamps which would hold the boards from side-to-side (still need to cut those, but not convinced of the design yet). The brass nuts are speed nuts from: https://www.garret…

and the following pages: