End Mill Bits To library

[Pruner (Troy Martell)]

HI I have A shapeoko 4x4 and Just Added A Spetool 1/4 End Mill O Flute Up Cut to My Library
When I Go To Make A 1/4 " Hole i Make it 0.27 and With A 201 End Mill It Works Perfect But When I Do The Same And Use The Spetool It Cuts The Hole Way To Big . Like 3/8
What Could Be The Cause ?

[WillAdams (William Adams (Carbide 3D))]

See: Tool Libraries

and

Adding tools in CC440 and later

This is a bit different — the tools are now stored in CSV files Windows: Help | About | Open Data Directory Mac OS: Carbide Create | About | Open Data Directory to access the carbidecreate/tools directory), and it is first necessary to add a New Library: [image] after clicking on the “New library” button you will get the “Create new library” dialog: [image] make appropriate selections (note that certain endmills only appear in certain materials — at this time, MDF has the most complete l…

Note that since the move to curated values in 434, certain entries which were required are now hidden in the data since they are not needed.

If that doesn’t help, post a link to the specifications for the tool in question, a screen grab showing the edit screen, and a photo showing how an attempt at cutting turned out.