Enjoyable Night in the Shop

I had a wonderful night in the shop. I was machining a pen stand for my cousin. While sitting there watching the paint dry I had my laptop playing a Joe Satriani concert. I have a bluetooth speaker my daughter had given to me a couple of years ago.

I had originally made this same pen stand for a man that comes to the Farmer’s Market. He and his wife are both on walkers and come every Saturday and walk around. If you talk to him he will talk your ear off. He asked me to make him a pen stand for 4 ink pens he had. I made it for him and gave it to him. I was an Army Officer and is a very nice man.

These are my pens I sell at the market.

I sent a picture to my cousin and he wanted one. So I changed the text to his name and cut it out tonight listening to Joe.

The cross piece that holds it together was drilled with 1/4" dowels on my Jessem workstation with the Jessem Master Dowel kit.

I also have the Jessem Pocket Mill Pro that makes loose tenons similar to the Festool Domino.

18 Likes

That’s a lovely story, and the pen stand looks great. Making one for him for free is a really kind thing to do, I bet he shows it to everyone at the market now. Satriani while the paint dries sounds like the perfect night in the shop.

Did you design the stand yourself in Carbide Create? And are the pens you sell turned on a lathe, or do you make those on the Shapeoko too?

Being a Texan…I hope there is some Stevie Ray Vaughan and his brother Jimmie Vaughan in that playlist, which may then lead to some ZZ Top / Billy Gibbons, then possibly some Freddie King…and the list just goes on and on! Love my Texas musicians! FYI…yes! I also have a nice speaker in the shop!!

I did design the pen stand in CC. The pens are turned on a lathe. I have been on a tear making pens the last 2 weeks. Trying to stock up for Christmas shopping.

pen_holder_10142026.c2d (112 KB)

The pens sell well at the Farmer’s Market and at a stall in a shop on main street in Nacogdoches, Texas.



Really wish I had a rotary attachment for my Shapeoko to embellish the turned pens. :zipper_mouth_face:

4 Likes

@gdon_2003

As a turner myself, pens are one of my favorite items to produce. These are very well crafted. Over the years the models available as kits has increased and very nice looking.

Good job!

@gdon_2003 & @Redlander … Pens… hmmm is that what one uses to press the buttons on a keyboard? :rofl: :rofl: :rofl:

Oh BTW Nice job Guy…They look awesome!!

Well…. Sometimes that winds up being the only thing they are good for!!

1 Like

Pens are my best seller. I agree that people write less than they type but a good pen in your hand feels good.

I like making pens because you get instant gratification. I glue up the blanks the day before with 5 minute epoxy. No it is not 5 minutes to completely set so I glue today and turn tomorrow. The wood pens go fast. The acrylic is somewhat slower. If you turn the acrylic blanks too hard they pit and break out. I finish my pens with a negative rake scraper to get a smooth finish.

Still wish I had a rotary attachment for my Shapeoko but maybe someday. :clock330:

2 Likes

Thanks Guy, they look beautiful, and thanks for sharing the .c2d too. The tip about not turning acrylic too hard is good to know. Hope the rotary attachment lands before the Christmas markets.

Guy, I did some cigars like the photo attached. Only used a V-fixture and a laser attachment on very low power. Worked a treat for Christmas gifts for a customer.

Unfortunately, all I have left is a prototype that got a lot of testing done to it.

4 Likes

Right now I got a monkey on my back and he has Mexican spurs. Trying to quit cigars but the problem is I really really like them. I know all the intellectual reasons for quitting but it is my pocket book that is begging me to stop. :upside_down_face:

Your cigar looks like it has been rode hard and put up wet. :laughing: Nice suggestion about using a laser. I have one I seldom use. Maybe I need to dust it off.

1 Like

beautiful pens!
I was thinking of making farmers market gift’s too. This year isn’t and option as it looks like a claymore went off in my shop.

I have a folding step stool in my shop. About 50% of the time I unfolded it the wrong way. So I wrote on the front “This side toward Enemy”. For those that dont know what they means a Claymore antipersonnel mine has that embossed on the front so you know which side is toward the enemy. Now I always unfold it the right way.

4 Likes

We would get along great, brother. Sawdust and Satch. Love it. That dowel jig is on my wish list. I didn’t know it could do the loose tenon thing.

I would love the file to cut out a claymore!! I see the light!!

1 Like

From Jessem it is 3 separate devices. The workstation works with the Pocket Mill Pro and the Dowel Master Kit. The workstation is easy to use and you can put either device on it. You can use the Pocket Mill pro or the Dowel jig without the workstation. Jessem is very proud of their products. They are well made but expensive. Kreg just came out with a domino like device to cut loose mortise and tenon devices. It is about half the price of the Festool Domino. I have watched reviews and for a weekend warrior the Kreg would work fine. If you are a pro the Festool would likely be better. Kreg also makes a MortiseMate that they worked with Jessem to produce. All of the products make holes to fill with loose tenons.

2 Likes