Looking for tool database documentation

[WillAdams (William Adams (Carbide 3D))]

There is a bit at:

https://docs.carbide3d.com/support/#tooling-support

and there is a bit more at: https://wiki.shapeoko.com/index.php/Endmills

and see

Adding tools in CC440 and later

This is a bit different — the tools are now stored in CSV files (do Help | About | Open Data Directory to access the carbidecreate/tools directory), and it is first necessary to add a New Library: [image] after clicking on the “New library” button you will get the “Create new library” dialog: [image] make appropriate selections (note that certain endmills only appear in certain materials — at this time, MDF has the most complete listing — further note that one aspect of this is the suitabil…

and

Amana tool library

Here is a .csv for the Amana tools which Carbide 3D has begun selling. Feeds and speeds are copied from similar Carbide 3D tooling for MDF and are untested: User-Amana.zip (792 Bytes) Here is a version which has the Amana feeds and speeds copied into it — breaking this up and naming it appropriately by appropriate materials and updating the feeds and speeds to match what the machine can actually cut at is left as an exercise for the reader: User_Amana_tools_Shapeoko_Various.zip (834 Bytes) A…

MeshCAM users should see: https://wiki.shapeoko.com/index.php/MeshCAM#TPS_files