Need to save my hearing - Spindle time

[WillAdams (William Adams (Carbide 3D))]

Please see:

Carbide Board 2.4 Drawings and tech info

Yeah the connections on the right are indeed pretty obvious (or at least documented), what was less obvious is that PWM is also available on the 6-pin ICSP header on left side of the board, and it made a big difference for me as I was able to plug a female dupont cable onto these pins and get that signal with no soldering required, i.e. without the need to unmount the controller board. By the way, just to document what has been said above for future readers, the ISP header (on v2.4d and probabl…

that and other potentially useful links are at: https://wiki.shapeoko.com/index.php/Shapeoko_3#Connectors