Recommended bit for a Fender Strat-style arm bevel?

CNC Machines Shapeoko
1

In the past, I’ve used a 1/4 inch ball end bit to handle bevel operations (e.g., like the arm bevel on a Fender Stratocaster). However, assuming the angle matches, would a 120 degree 1 inch shank bit (linked below) make a bevel cut go faster than a 1/4 inch ball?

https://www.homedepot.com/p/Yonico-V-Groove-120-Degree-1-2-in-Shank-Carbide-Tipped-Router-Bit-14997/316243349?source=shoppingads&locale=en-US&srsltid=Ad5pg_E3z0QVcpkuBJ29_psrRRY5SuHK3q0-0PlRZO3MW3o0O1QGg2-K2Jw

2

Not likely. Use a larger ball end bit with a 1/4” shank. I use something like a 5/8 ball bit for this. It’s still the best option I can find.

Here is one for example. Just find one in a brand of your choice.

2 Likes
3

Great recommendation, thanks!

4

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.