Waste board question

[UnionNine (Jonathan K)]

I’m an aluminum t-track person because you can get a set of 3x 4’ sections for about ~$50 when you include shipping, and then the bulk of the cost will be what you’re mounting it into.

I did mine in HDPE which I had routed by a commercial cabinet shop with channels for the T-track:

Waste table thoughts

I’d recommend Orange Aluminum t-track and I’d suggest routing grooves in a base-board to mount the track in, then mount the base board using the same holes as you would with the regular stock MDF board. Here’s the board I did, installed without the track yet: [image] And here’s something clamped in the Nomad vise installed on the track: [image] And here’s a much larger project in the process of getting clamped down as well, on top of a sacrificial waste board: [image]