Z axis Ball Screw Conversion Kit

[EvanDay]

Direct link to the product mentioned above:
http://cnc4newbie.com/store/index.php?route=product/product&product_id=90

This is the only commercial custom fit one for SO3 that I am aware of. Otherwise you are building your own, like in this thread:

Lets make a Z axis - design files and parts list

Following on from my Z axis linear guide upgrade I’ve been asked by a few people for drawings and spec, so here it is. For reasons why and more detail on the results please take a look at my youtube. [IMG_8558] The approx cost of this is £50 or $75 + time. First off you will need a ball screw and nut - I had mine machined in china this is the one I bought. This company will be able to mill a custom size which is very important if you want to use the below design. If you do not adhere to th…