Hey all, recently I’ve noticed my Z-axis having ever so slight play when I’m doing 3d finish passes with my tiny Amana 1/32 ball nose. When the motors are engaged and stiff, I can still easily move the entire carriage up and down about 1/8th to 1/16th of an inch. I can only surmise that the leadscrew piece of delrin has some play in it that I can’t fix on my own.
Has anyone else had this problem?
Videos of the play. You can see the carriage moves but the leadscrew does not.
https://drive.google.com/drive/folders/1b3xmmdsrD0t9NAKKdR14NyFg0WG9Dj0c?usp=sharing