This ZIP file contains three versions (5f, 6f, 7f) of my Post-Processor for Vectric Vcarve
CNC design software for use with the Carbide Motion (CM) gcode sender, and the
associated supporting User Guide.  The versions history summary are as follows:

v5f: my original version I developed using a Makita Trim Router and adding a 1-second
Dwell when raising Z to SafeZ to prevent rapid XY moves into keep-out zones.

v6f: an updated v5f adding in the manually entered static Vectric TIME display on CM
Status line for Trim Router.

v7d: a revised v6 supporting Spindle/VFD messages on CM Status line.

v7e: an updated v7d adding a 1-minute initial Spindle/VFD warmup routine.

v7f: an updated v7e adding a 1-second Dwell when raising Z to SafeZ to prevent rapid
XY moves into keep-out zones.


Thus versions 5f and 6f are for Trim Routers and version 7f is for Spindle/VFD.