Nomad build plate jam

I hope someone can help me. My 883 pro has been working fine until I started up a new project and during the initial homing process the build plate which was all the way forward jammed , making a horrible noise. I turned the unit off and tried to move the plate toward the center manually but it is stuck, unmovable. When I turn the Nomad back on it shows a limit switch error. How can I get the build plate moving again.
Thanks for your help!
Amanda

I had that problem because I did something very dumb…

1 Like

Ok, I’m an idiot. I used the wrong bolts to screw down the wasteboard and it basically screwed the build plate into place. I hope I didn’t screw up my Nomad.

Mine was fine after.

1 Like