Advanced VCarve not cutting similar geometries the same?

[WillAdams (William Adams (Carbide 3D))]

This is what I do to unplug and relax.

The separate toolpaths are a new v8 beta feature:

Carbide Create V8 Beta

Ok, this one is a bit dangerous. We just uploaded 810 to Carbide Create Beta Downloads and it’s got a big change that we’ve wanted to make for a while. Now, if you create a V-carve with a pocket toolpath, they exist separately in the list view so you can reorder all of the pockets and Vees together. If you edit one, it will affect the parameters of both. If you delete one, it will delete the other. If you create a V-carve without a pocket, you cannot go back and add one later; you need to c…

For some geometries, the V carve algorithm will find its way to a sharp tip, for others it does not — this sort of math is at least difficult — I’m finding similar, but not so complex problems very, very, very hard for a personal side project.

The Corner Tool finding places to round is a function of the analysis of the geometry and the dimension set.