I need a 4thaxis.post file created.
I replace a few M codes in the file. I would like them to be created during the post.
Is that a possibility?
G90
G20
(Pocket.To…)
M05 remove
M0 ;T102 remove
M03S22000
G0X-0.0009Y-0.8135Z0.0100
G1Z-0.0250F5.0
X-0.0010Y0.8135F40.0
X0.0863Y-0.9375
X-0.0864
G0Z-0.1402
G0X0Y0Z0.100 ADD
M2 remove
M5 remove
M99 ADD
I’m working on this, but got distracted by lunch and beer, will jump back on it later or tomorrow if no one else jumps in
Is that Siemens approved?
Dassault probably has wine with lunch.
Lunchables & juice boxes 
1 Like
Hi Tod
It works.
Thank You very much.
I am using this as a sub routine.
Thanks
Doug
Tod
What kind of beer? AND where do I send to?
Doug
No worries. Glad to hear it’s working well. I create posts for a living so I was happy to figure out how to do it in CC. I edited mine already to include a stop (M0) on the spindle on line to let the spindle rev up.
But for the record… I’m just across the lake in Michigan. I live on Lk St Clair. And I generally like beer I can’t see through 
3 Likes