Bench for Shapeoko Pro Standard

[WillAdams (William Adams (Carbide 3D))]

I mounted my control box underneath my bench against the side — would probably do that on the other side if I got a VFD.

Mounting the electronics for an SO5 Pro

Needed to mount my SO5 Pro control box out-of-the-way — while the dimensions were given in: the hole locations were not. Here’s a template I worked up — YMMV, please check against your box, &c. so5_electronics_template.pdf (1.1 KB) which worked for me: [image] [image] [image] [image] and the MDF was screwed to one side of the base of my workbench.