Hello, I have recently received my Shapeoko Pro, and I saw a video where a maker had engraved a grid on his spoiler boards. I see that the specifications for my bed were 33 x 33 inches, so I created a grid in carbide create with 1 inch spacing , using a 90 degree v-bit and no offset, going down sl…

Creating grid of usable area of bed

WillAdams (William Adams (Carbide 3D)) December 28, 2024, 12:05am 4

My recommendation for this sort of thing is to start out by mapping the Rapid Position points and then to draw out the balance of the structure in relation to them: