Deep mitre with 90 degree v-bit

[WillAdams (William Adams (Carbide 3D))]

OIC, see:

Full blind box joints in Carbide Create

Next, determine what the minimum number of passes necessary would be: [image] One option would be to have a different number of passes on each side. Draw in a suitable line for one cut and use Linear Array to duplicate it as many times as needed, w/ extras for origin and end points: [image] If need be, adjust the width of things to line up w/ stock thickness. Then, measure the distance: [image] and assign toolpaths working down to the necessary depths: [image]