*Definitive* guide to moving to Fusion 360 CAM?

Just got screwed again by Meshcam bugs, so I’m moving to Fusion 360, where I do my modeling anyway.

There are several questions on this, but is there a definitive guide to using the Nomad with Fusion 360? I found the tool set to import for the standard Carbide set, but I hit a snag with some conflicting (or missing) information. (the latest Meshcam bug was “ghost” machining regions.)

1 Like

We have a very basic page on this at: https://docs.carbide3d.com/software-faq/fusion360/ which has a link to a discussion here — @wmoy uses it.

Some videos which may help:


There is not much specific to using the Nomad with F360. I have learned a lot from the YouTube channels :slight_smile:
Lars Christensen


1 Like

I recently decided to make the jump to Fusion and have been working through these video turtorials: http://help.autodesk.com/view/fusion360/ENU/?guid=GUID-60F8E660-C050-47CB-A4E1-37A385EDC5BB


This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.