Dewalt 69MM Sweepy 2.0 Dust Boot

[Ensalaco (Joe E)]

I may have mis understood your question. I did find this post from a few years ago

Problem with new Sweepy Dust boot

Sure. Here are 4 slightly different views. If this doesnt help, let me know what else you would like to see while the bit is still in the machine. The bit is a Whiteside .125" spiral upcut. If you look closely you can see the bit sticking out beyond the bristles about 1/8". At the end of. the 3/4" cut the bristles are quite compressed but it works through the entire stroke of the cut with zero visible debris. [IMG_0792] [IMG_0793] [IMG_0794] [IMG_0795]