Door won't stay fully closed and chip fan won't stay on

[Julien]

While you wait for an official answer from support, you may be interested in this thread, for the door issue:

Door Sensor Issues

Set up our makerspace Nomad and its everything I ever wanted from a CNC machine. Only issue is the door keeps vibrating open and tripping the safety when running. I’ve tried moving the sensor as far forward as possible and reseating the hinge (not a fan of the hinge but I see why they’ve gone down that route). Now its better but still happens after around 10 mins. Especially with the dust fan on the spindle because the dust builds up between the sensor and the door. Anyone else solved this iss…

For the fan, I would probably just ask support to get a new one if the one you have is defective or broken