Enhancement Request Surface Wasteboard

[WillAdams (William Adams (Carbide 3D))]

It’s a pocket or a contour operation and has the following variables:

• machine size/type
• bed type (whether or no one has a Hybrid T-track table)
• tooling

We have sample files:

Wasteboard Plans with threads

@The_Researcher @markwal @rwizard @WillAdams @RichCournoyer @BoscoBob Thank you every one who added to the discussion here. Its a sign of a growing forum. How do we keep experienced users engaged while fully supporting our New members? I will create some Utility files in Carbide Create and work on a CNC Noob section with curated resources specifically for the newest Members. Until the “Official Getting Started Thread” gets posted, let me ask everyone: What resource files could be incl…

Notes on rapid positions and wasteboard leveling

For surfacing, here’s a zig-zag pattern for a #201 on a Pro XXL (should also work for an SO4): surface_slat_pro_xxl_origin_front_left_0_001mm.c2d (12.2 KB) v7 file: surface_slat_pro_xxl_origin_front_left_0_001mm_v7.c2d (44 KB) Just set the origin at the front left of each slat and run it — I mark each w/ a zig-zag pencil pattern, use a level to pick which one is lowest and start w/ that one for Z then I jog over and only change the X origin for each other slat. Repeat until all pencil marks …