Faux Mahole Cover Table with shelf

[WillAdams (William Adams (Carbide 3D))]

Or, perhaps:

Importing Crocodile STL and assigning toolpaths

For importing STLs see: and The STL which was mailed in was in a .rar archive: [image] which we used 7-zip to extract: https://www.7-zip.org/ [image] Then, Carbide Create was opened: [image] Geometry was drawn: [image] and Import STL invoked: [image] [image] The values adjusted: [image] until the desired result was achieved: [image]