Feature: Set Park Location XYZ for post job?

[Lumenarius]

I am sure it is possible to do this by editing the G-Code but having a GUI method for setting where the machine will park after a job in Carbide Create would be a very valuable tool.

For instance, on short jobs the machine will sometimes park right near the XY 0 point and so you have to manually jog it out of the way in between moving in the next pallet.

It would be great to have it automatically park 12" to the right instead and this would speed up ops considerably.

[mhotchin (Michael Hotchin)]

See also this request:

More option for End of Program movement

Right now Carbide Motion executes special behavior when it sees M2 (end-of-program). Raise spindle Move straight back I find that in many cases, even all the way back the carriage and spindle are in the way. I would like more options for end-of-program behavior: Current (reasonable default) Current, then move to top right (close to machine 0,0) Raise spindle and stop. The last is useful for certain operations where the machine is working in a deep pocket, or with high work-holding - the l…

[CullenS (Cullen Simpson)]

You could create a quick action or use one of the nearby rapid positions.

[Lumenarius]

I will look into quick actions.

Though, less clicking and more automation is good.