I have a used but well maintained 4’ x 4’ Shapeoko Pro CNC Router by Carbide 3D, being sold as a package with pretty much everything you need to get going. I’m in the greater Indianapolis area on the north side, about four hours from Chicago or two hours from Cincinnati. Local pickup only.
$4,250
Includes:
-4’ x 4’ Shapeoko Pro
-Carbide 3D 65mm 110v Spindle Kit w/ VFD
-Carbide 3D BitZero v2
-PwnCNC Extra Long Spindle Cord
-Carbide 3D Sweepy Pro Dust Boot
-Carbide 3D Sweepy v2 Dust Boot
-Carbide 3D Dial Test Indicator Mount
-Carbide 3D DIY Mount
-Carbide 3D Gas Strut
-Carbide 3D Airblast
-PwnCNC Ultimate Hose Clamp for 2.5" Hose
Included Workholding (~$750 total):
-Carbide 3D Teez-Nuts (40x+)
-Carbide 3D Lock Stops (12x)
-Carbide 3D Standard Tiger Claw Clamps (8x)
-Carbide 3D Compact Tiger Claw Clamps (6x)
-Carbide 3D Aluminum Gator Tooth Clamps (12x)
-Carbide 3D Essential Gator Tooth clamps (6x)
-A Good Selection of M6 Bolts
Computer Monitor:
-Waveshare 13.3" Capacitive Touch Screen LCD Monitor
-Monitor Mount
Work Table:
-32" wide x 28" deep Rockler Rock-Steady Stands, (2x)
-32" wide x 44" deep Rockler Rock-Steady Stands, (2x)
-Rockler Rock-Steady Casters (8x)
Bits, Endmills, Etc:
-Amana RC-1141 90° Insert Vee Bit
-Amana RC-1148 60° Insert Vee Bit
-Amana RC-1145 45° Insert Vee Bit
-A nice assortment of Carbide 3D endmills to get you going because I love you and want you to be happy.
Spare Parts:
-Carbide 3D Limit Switch
-Assorted Extra Hardware
-Original Carbide 3D Spindle Cord
This is almost everything you need to get going, just add dust collection, a surfacing bit, and a cheap laptop or Windows tablet and you’ll be good to go.
The machine is used, with less than 200 hours, and only used for wood and soft plastics. I’m meticulous about maintaining my equipment, so it was wiped down with oil after every use, kept clean, and the bearings were oiled often. Spindle bearings are good, and runout is the same as when it was brand new. Spoil board slats are pretty much brand new, only surfaced once with a handful of threaded inserts added.
I’m only selling to downsize to a slightly smaller machine so I can fit a giant cabinet saw and jointer in my garage shop.
All told this was about a $7,500 package when I purchased it, and some prices have increased since then. You can check out the Google Sheet bellow for exact details of what’s included.
The machine is setup currently, and I’m happy to take some video of it in operation. It’ll need to get broken down to move, and the four Rockler stands unbolt from each other without too much fuss. I’ll wipe the Mac mini computer as well, obviously.
I can take credit cards through my LLC or do a PayPal G&S invoice as well, but I’ll need to add 3% to the price.
Ask me whatever questions you have, and I’m happy to provide additional pictures.