Hi All…
See below for more detailed information and photos.
Thank you in advance for your interest.
If you would like the Marketplace posting, feel free to reach out and I will provide it.
This forum will not allow links within it’s messages.
Selling a practically brand-new, production-ready Carbide 3D Shapeoko 5 Pro (4’x4’ cutting area) CNC Router setup. This machine has less than 20 hours of total run time, most of which was just the initial precision calibration and setup.
We originally purchased this top-of-the-line machine for our business to mill features for a specific product line. Because we are discontinuing that product, we no longer need the machine. Our pivot is your gain—this is a turn-key opportunity to get a massive, premium setup without the retail price tag, shipping wait times, or hours of assembly.
Everything you need to instantly start production is included. Total retail value for this package is over $7,900. Most of the included high-end accessories and tooling packs haven’t even been opened.
What’s Included (Over $7,900 Retail Value):
Machine & Power: Shapeoko 5 Pro CNC Router (4’x4’) with upgraded 80mm VFD Spindle Kit ($4,950 new)
Table & Enclosure Accessories: 64" x 64" Universal Bench Table with Standard-Height Legs + dual-layer MDF mounting sheets ($365 new)
Dust Collection: Mullet Cyclone Dust Collector (Used less than 2 hours - $275 new) + Sweepy Pro Dust Boot ($150 new)
Precision Accessories: BitZero V2 for easy zeroing ($120 new) & Shapeoko 5 Pro/HDM Maintenance Kit ($15 new)
Premium Tooling & Workholding Bundle (Mostly Brand New/Unopened):
Nomad Endmill Starter Pack ($190)
Shapeoko Endmill Starter Pack ($195) Amana AMS-119 CNC 3-PC Starter Pack ($125)
Amana AMS-114-K 3-PC Signmaking & Engraving Pack ($121)
Amana AMS-199-K 2-PC CNC Signmaking Pack ($121)
Amana AMS-195-K 2-PC CNC Plastic Cutting Pack ($86)
McFly Surfacing Cutter - 1/4" Shank ($90)
(Qty 2) Essentials #302E 0.50" V-Bit Cutter - 60° ($35)
(Qty 2) Tiger Claw Clamps - Set of 2 / Flat Top ($140 total)
(Qty 2) Crush-It Essential Clamp Set ($116 total)
Lock Stops (Set of 4) ($35)
Teez-Nutz for Hybrid Table ($15)(Qty 2) Crush-It Nutz 'n Bolts ($30 total)
Note: I also have an assortment of other brand-new related items and bits that are too lengthy to list here but will be included with the sale!
Carbide 3D equipment is famously engineered, made, and supported right here in the USA, which was the biggest selling point for us. The customer service is unmatched. If it doesn’t sell, we’ll keep it to produce engraved products, so lowball offers will be ignored. Thank you in advance.
I am located at…
Sunset Engineers
2009 Patch Street
Stevens Point, WI
Price: $5900
Note: There is a crazy amount of extra with this purchase, much of it unopened.
