Fusion 360 post processor for Grbl

Announced at: http://www.shapeoko.com/forum/viewtopic.php?f=3&t=8353&p=65111#p65111

. …took the existing GRBL PostProcessor and cleaned it up to make it better.
If you have a Makita RT0700 or Dewalt 611 or similar, it also translates the spindle speeds to a dial setting.
If you make mistakes in your design, the post-processor will alert you and recommmend how to solve them.

It’s free, documented, feedback & test-results are welcome.

3 Likes