Harbor Freight discontinued their metric clamps

[WillAdams (William Adams (Carbide 3D))]

Now, only the Imperial (58 pc.) set is available.

Anyone find any useful or interesting alternative M6 clamp sources recently?

The Miteebite clamps are listed on the Nomad Trello, and the ones from Little Machine Shop are currently back-ordered.

I posted a simple design to:

Nomad 883 threaded table and clamps

Okay, draw up a suitable file, and determine what sort of hardware will be used — M6 is needed for the threaded table, but if you’re in the U.S., 1/4-20 may be more convenient, so making use of both — adjust for your locale / inclinations / OCD. The clamp will be cut from a bar of aluminum, 1" wide by 1/4" thick is readily sourced in the U.S., and will have two holes, one threaded (for either M6 or 1/4-20 — you pick — the latter needs a #7 drill bit so we draw a hole 0.201" in diameter, while t…

and a bit of searching did reveal these:

https://www.ebay.com/itm/24-Pc-M6-Metric-Clamping-Kit-For-Micro-Mini-Lathes-Mills-Drills-Clamp-and-Hold/291709890944

which look like a good fit.