Help with 3D Design

[WillAdams (William Adams (Carbide 3D))]

As a starting point see

Could anyone help with this 3D Carve?

Is this what you’re after? [Screenshot 2025-03-23 at 10.31.56 AM] Assuming so, here show I would proceed: [CNC leaf] Something I’ve figured out this last couple weeks is to use the 3D rough pass and the first finish pass for the field as well as the model. When you use a very fine stepover for that first finish pass the field is very uniform versus doing it as a separate pocketing operation. You may want to adjust some of the parameters I’ve used. Say, make your base 0.50" high versus 0.7…

If still stuck, let us know and we will walk through this w/ you.