Help with Point Round over bits

[WillAdams (William Adams (Carbide 3D))]

Carbide Create doesn’t support this endmill geometry and can’t do a 3D preview using them.

I looked into this a bit at:

Design into 3D: Boxes: Magazine storage

Next up is more boxes, this time for magazine storage — for my part I just cut open Fed Ex boxes: [WIN_20190912_14_02_59_Pro] But they’re not always available in a suitable size for typical magazines. There are a number of commercial options: So there is certainly precedent for wooden boxes — we’ll try for an inexpensive material, since this is going to be a fairly large project (sorry Nomad owners) — Luan Plywood is available at most home centers, usually as underlayment, a bit of care…

You can use them using offset geometry if you’re willing to work w/o a 3D preview.