I made two beautiful ugly faces today

My first SO3 projects.
Me with words “Put not you faith in man”, and cousin Timmy.
I used Artcam 2011.
1/4" end mill that came with machine, and 1/4" 2 flute ball end router bit.
Roughing end mill @ .4 deep, 75 in min, Dewalt dial on 3.5.
Finnish= ball 10% step down/ step over @ feed of 100 iPM, speed max.
I’m very pleased with the speed and power.
These pics are 6" square and took 20 minutes each. Awesome!


Here’s the video we made.