I’m using Carbide Create 474 with a Nomad. I create design files in Affinity Designer, then import the 96 DPI SVG files into Carbide Create. I have a custom 8 x 8 work holder in my Nomad, so to easily ensure that the design file lines up accurately with the work holder, I add an 8 x 8 square around the perimeter of the SVG file before importing.
When I import the SVG, initially it appears that the SVG matches the work area in Carbide Create, but when I zoom in closer, I can see that the SVG’s perimeter doesn’t exactly line up on all sides. Again, the design and the stock size are both 8 x 8, so I’m not sure what’s causing this discrepancy, but it seems to be slightly throwing off the alignment of my cuts.