Is the Shapeoko 5.1 Pro 2’x2’’ Portable?

[WillAdams (William Adams (Carbide 3D))]

According to:

https://carbide3d.com/shapeoko/shapeoko5pro-specs/

the total weight of the 3 packages, with material and all electronics is 182 pounds for a 2x2, so deduct the weight of the latter.

I move a smaller and lighter machine on a miter saw stand:

Need a folding stand for your machine?

This was posted about again at: and I finally got around to putting together the one I bought: [20210704_1022481] Mounting it was simplicity itself — just needed 4 M5x30 BHCSs, and 4 washers from the stand hardware supply, and 4 M5 washers and 4 M5 nuts — for assembly you’ll also need a 10mm socket and ratchet. Next up is working out mounting the power supply and working out a way to secure the USB cable and other accoutrements.

it might be workable to use a similar stand scaled to the SO5 Pro at that size.