JTech 7.0 w Laser and Vectric 10.5 Post Processor

neilferreri · August 1, 2020, 5:30pm

@Bonch added you to the PM.

DanSexton · August 7, 2020, 3:52pm

Vcarve 10.506 was released today which fixes this issue. It’s not in the release notes but it was fixed.

neilferreri · August 7, 2020, 4:05pm

Here’s the post processor that @DanSexton confirmed to work before the Vectric fix (added a workaround for the Vectric bug).
I’ll leave it as-is for now…it will work for those with or without the newest patch.
Grbl_mm_TC_wLaser.zip (1.7 KB)

Added to GitHub here:

github.com

neilferreri/V-Carve-PPs/blob/master/LaserModule/Grbl_mm_TC_wLaser.pp

+================================================
+                                                
+ Grbl - Vectric machine output configuration file   
+                                                
+================================================
+                                                
+ History                                        
+                                                  
+ Who      When       What                         
+ ======== ========== ===========================
+ EdwardP  28/11/2014 Written from GCode_mm.pp
+                     Added arc move support  
+ EdwardP  11/02/2015 Commented out arcs as these
+                     slow GRBL performance appear 
+                     interpolated anyway
+ EdwardP  18/06/2015 Explicitly set absolute mode (G90)
+ Mark     24/11/2015 Updated for interim 0.9 spec.
+                     Renaming to be machine specific.
+                     Removing M30 from Footer.
+ EdwardP  01/02/2018 Updated according to 1.1 spec

This file has been truncated. show original

system · August 26, 2020, 8:41pm

This topic was automatically closed after 30 days. New replies are no longer allowed.