I see the connector is connected to the pins that most people use to control a relay to turn off and off the router. I thought it was a molex microfit 3, but it wwasn’t quite lining up.
Is it possible to get the type of connector that is, so I can use it to make a relay?
Nessk
(Kenneth)
February 27, 2020, 8:03am
2
Could you post a picture of this connector please?
Sadly I can not get to it at the moment, here’s another thread talking about it
I just received a new Shapeoko 3 XXL two days ago. I was looking at the control board and noticed there is a set of connectors on the right side that don’t seem to be documented. Sorry I don’t have a picture of my machine, but here is a picture showing the LACK of that connector on previous models. Does anyone have any info on what the new connector is for?
[lpe-5]
Nessk
(Kenneth)
February 27, 2020, 3:44pm
4
Thanks, however if you need help on what type of connector that might fit we need a closeup picture, or wait for C3d’s response on type.
I went and got some pictures. One is blurry due to the angle, the other straight on shot is pretty good.
Luke
(Luke (Carbide 3D))
February 27, 2020, 4:36pm
7
This is for a new accessory we are working on. Watch this space…
4 Likes
Griff
(Well crap, my hypometric precursor device is blown…)
February 27, 2020, 4:41pm
8
…but…I’m holding your beer. I have to do both?
2 Likes
but I wanted to use it for a relay Could you at least give the connector type if possible?
Luke
(Luke (Carbide 3D))
February 27, 2020, 4:52pm
10
@jorge needs his beer held
5 Likes
fenrus
(Arjan van de Ven)
February 27, 2020, 5:58pm
11
at his point we’re all holding many beers
on the one hand I love it
on the other hand… TAKE OUR MONEY NOW
DanStory
(Daniel Story)
February 27, 2020, 7:22pm
12
Looks like a PCI-Express 6-pin, is this for ray tracing in the future?
1 Like
Budman17r
(Todd)
February 27, 2020, 8:37pm
13
It looks like a Molex Microfit 3 Connector, but doesn’t fit (I have them on hand.) Might be an ultra fit connector type though (but its the female version which is normally on the outside.
Here: https://www.molex.com/molex/products/family/microfit_30
and
here: https://www.molex.com/molex/products/family/ultrafit_power_connectors
PCIE is this https://www.molex.com/molex/products/part-detail/pcb_headers/0455580002
stutaylo
(Stu)
February 28, 2020, 10:36am
14
Man you guys are charging on the upgrades, love it
I’ve got about a tray full of beers by now @Luke @Jorge
Finally!
PS I made my own version of this new accessary 3+ years ago, and of ALL the neat things I have done to my Shapeoko, this by FAR has been the most rewarding! (And my neighbor thanks me too for it).
I think I HEAR what you are saying, Richard.
1 Like
system
(system)
Closed
March 29, 2020, 12:52pm
17
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.