Known issues with vcarve to carbide cutter?

[WillAdams (William Adams (Carbide 3D))]

See:

Vectric tutorial overview

Vectric makes a line of popular software products. Here is one example of a workflow to create a G-Code file using these applications. Of especial interest is Design and Make, available from: http://www.designandmake.com/ — AIUI, this application / web site was originally a 3rd party, but was purchased by Vectric. The software “Design and Make Machinist” is freely available, and will allow one to use free and purchased clipart, adjusting and repositioning it as desired, then export it into a fo…

and

Vcarve Pro and Post Processor

@luc.onthego Still not tested with the BitSetter. EDIT: Tested the Grbl mm TC…works with the BitSetter as hoped. It will ask you to turn on the router after probing the BitSetter. They will also correctly list the first tool in CM.