What specific task are you trying to do which you are having trouble with?
All of it. If you are close enough to where I can get some in person help, say when and where and how much. Otherwise, we’re waisting each others time here. Thanks for response and forgive my bluntness but I’m done with the online method.
Oh come on, … give a for instance…?
There are too many to list in carbide create. It embarrassing. So unless you are in south or central Texas, and willing to lend hand in person… Have a nice day.
I was new to carbide create once and im sure shared many of your frustrations most likely as it was something new to learn. Everybody learns certain ways and I am also more of an in person learner.
If you do not get any in person responses I would suggest searching “carbide create” on YouTube and do basic step by step design videos which is what I ended up doing. I would watch a video for a step, pause it, and go do that step in carbide create then continue doing this thru the video. By the end I had designed what was shown in the video and learned a great deal. This gives you the feel as if it’s in person.
This is a great community of supporters and many will help with whatever they can so dont give up and get rid of the machine yet! Once you get going in carbide create it will become easier and seeing the end results of projects is exciting.
Maybe its time to move away from carbide create and try something else. Vectric has good programs, they arent free but they have excellent getting started guides and videos.
But if you are set on only learning in person you are most likely S.O.L., especially with covid still a thing. No company really provides in person training with machines in this cost range. You need to watch youtube videos and ask questions in forums to learn to use. But it seems you are unwilling to learn that way.
Please help us to understand in what way you are not succeeding with the online assistance.
I don’t see any tickets under your name which would indicate any difficulties, nor any requests for the sort of custom tutorials which we do for folks.
Hi Joel, I am saddened to read this because it appears to be a poor outcome. I have only had my machine since October and being in my 70s has meant that CNC had largely passed me by. I had lived my life without needing it or understanding it. I found it relatively easy to assemble the machine, taking more than a few hours. I also thought that careful assembly over a few days would ensure everything would work well. It kinda worked and I was pleased and then found that my assembly, although filled with care, had not considered much in the way of what takes place when the router generates forces to cut and the machine has to hold everything in the correct relationship to everything else and do it without any play.
My starting point was that other people are managing to use the machines so it must be possible. Like you, I find complex things are easier to take on board if some person with the relevant know how shows me once. One of the key elements to my decision, to buy a ShapeOko machine from Carbide 3D, was the level of support provided in the forum. Yes, it is not how I like to do things but the amount of expertise on hand is outstanding. What is clear is that the forum guys are incredibly supportive and Carbide staff are always on hand to assist and provide that assistance readily and very frequently.
There are countless video presentations on YouTube and there is not much that cannot be found and explained in videos that can be downloaded or watched several times and paused when things feel tricky. From receiving my machine (I am in the UK) to getting it working well took me about 3 months and in the last 3 months, I have started to use the machine for specific things. Small projects that one creates at the beginning of the journey but that teach valuable lessons and build the knowledge into a functional library of skills with which you will achieve your goals.
Knowledge is an interesting marker of what information you have assimilated over a period of time. We pay a lot of lip service to the notion that we can acquire a skill and that when we have completed enough hours or made enough things, we are somehow baked and that is the endpoint. In reality, we never stop collecting information and we are never fully baked. I understand more now than when I started. In another 50 years, if I stick around and live to 120, I would know more than I do now.
Here are some posts from me and the responses. The next post is machining a complex item in 3D.Guidance required for small 3D project
The following post was making a box using a method I followed from a video presentation. Cube à la John Clark
The last post in this small series shows me interacting with the wider community and the 3D part, I requested help with. Feature Request CC & suggestion for feature requests
I am not trying to say I am fantastic and super productive. I am trying to say, from a knowledge base of zero, I have been helped to get to this current point by Carbide 3D staff and the very many willing and super knowledgeable folk on this forum. All requests for help have been taken seriously and acted upon in the most productive manner that can be found. The use of the internet is an amazing resource and in the normal way of things (especially with covid restrictions) I would not expect to be chatting to a guy from Texas.
- stick with it because it will repay your effort.
- don’t sweat anything because it will all come to you as you need it
- Find instructional YouTube videos of which there are hundreds. Winston Moy and John Clark are two reliable and trusted names.
- Ask, Ask and Ask again. Use the messaging system if you would prefer not to chat in public.
- Start at the beginning and make all your goals achievable ones. Find small specific projects that can be done with the skills you have developed and then you will build upon the skills.
- Some things will require you to mess up. It is an integral part of learning and some things will require you to step outside of what you know, to learn more. Take it slowly. There is no-one marking you or your work out of ten. Enjoy the ride.
- If we don’t make mistakes, we don’t learn.
I understand that this post is not what you were asking for nor hoping for and at the risk of irritating you, I made the post anyway. I was prompted by the thought that I have stood where you appear to be now. I had made two unsuccessful attempts to understand this set of skills with two different machines. After running away from them both (for different reasons) I found that I was the common denominator. It matters not where we run, we are always there.
I want you to see that we all start from not knowing because we are not born with the skills we need or want. I am a still a beginner but I have learned a little of the technical language that has helped me to ask for the help I have needed, in the right way for the right problem. I now have a steep hill to climb but that has never stopped me in the past. Time and application are all that we can bring to the tasks which stretch out in front of us. I could write out a list of everything I need to do to feel comfortable with being left alone with a very capable machine. I wont do that because I don’t want to make this seem to be like an impossible task.
There is no reward in being frustrated to the point of giving up. We all have to ask and we all have to deal with things as they are, not how we would like them to be. Stick around, talk with @WillAdams, @Julien @wmoy @fenrus and @45rpm. That is just a basic list and is not supposed to reflect badly on the rest of the forum membership. These people have helped me a considerable amount but so have the many others who have responded to me on the forum. I hope you can work it out.
I appreciate all that. Truly. My browser history looks like it has a carbide create, cnc youtube rash…
I was extremely frustrated yesterday because I realize Im the weak link so far. I will continue out of spite.
Unwilling and not having success are 2 different things. And yeah, I agree Im sol at the moment. Thanks.
I purchased this 11-24-20 and the assembly was easy and fun. I have called tech support more than once and they even set up in person call to Finnish set up. I appreciated that. I don’t know what tickets you talking about and I’ve never hear of custom tutorials.
Normally the way this sort of thing transpires is a customer notes what project or file they are having difficulty with, sends in a file, or a sketch, and we work up a step-by-step custom tutorial to accomplish what they are having difficulty with.
which has been updated slightly at:
As @jepho noted, the best way to approach this is to start with an exceedingly simple task, and work though it from beginning to end, learning from the successes, and working out the difficulties encountered systematically, with the simplicity of the task making the difficulties simple to identify and to resolve.
Where would you like to start? What basic thing would you like to try to do which you are having difficulty with?
We can’t help if you don’t ask for help in a fashion compatible w/ what it is practicable for us to provide.
I’ll repeat that I offered to do a video call (sorry I’m not in texas … and covid) to talk you through a bunch of basics
[and no I do not charge for stuff]
Again… I truly appreciate all the offers and moral support and well wishes.
I am stepping away from the machine for a few days to finish some cabinets and cool off.
If it helps any I just figured out that I needed to get the face plate all the way to the top, so my z axis switch could find it and then all of a sudden my machine started working the right way. It took my a few weeks to figure it out, I redid the wiring a few times while, and I sat in frustration while I got the 'Homing failed: something could not be pulled."
So if your face plate is all the way down at the bottom like mine was, just unscrew the thing to hold the router, take off the face plate, move those slider things to the top, and twist that swivel on the riser pole near the top. Be sure to match the screw holes on the back of the face plate to the screws on the swivel on the riser first before you putt it back together, because it’s just easier that way.
I forgot to mention the back of the face plate should be covering the z axis switch, so it will be found that way…
I really hope that helps and you can understand my coding of this and that.
Joel - I live in Austin and am willing to help. But first, a bit of disclaimer. I do not (yet) own one of these machines. I’ve been trying since November to buy a Shapeoko Pro XXL but have not been lucky on timing to order one. (Hopefully I’ll get to order one next week.)
However, I have CNC experience and have been using Carbide Create on a different CNC machine with great success. Price for coming to you would depend on where you are (travel time).
Send me a private message if you would like me to help and we can work out details.
Well, I finally figured it out!!! I had to uninstall and reinstall carbide create and motion.
I want to thank everyone for their encouragement and offers to assist…
The curse of being an in person learner weighs heavy. LOL.
Well, that’s great,
Have A Nice Day
I know how u fell I was once there also. I had no experience in using a cnc machine when I purchased mine. Thought at the time how hard could it be. While the machine wasn’t the problem. Never using software like that was. But after time and by watching videos and talking to people. I have come to the point where I can make something that turns out nice. Still have issues at time but people have been great on making a file n being able to walk through it. Start with simple stuff. A small plaque using just one bit. Seeing something u made that came out good. Gives more encouragement it did me. Them move up to making a plaque using 2 different bits. Just start small. Check out videos of Ben Myers woodwork he has simple to follow small things. How to make your own clamps. Wasteboard n starts with a simple plaque n adds to it. Just don’t give up. Once u make something small u will not be able to stop. I now can spend hours out in the shop just messing around.
This topic was automatically closed after 30 days. New replies are no longer allowed.