Making a plinth block using Carbide Create Pro (and other software)

[WillAdams (William Adams (Carbide 3D))]

We use the technique from:

Making a guitar bridge for Carbide Create Pro

First export the profile geometry as an SVG: [image] [image] once one has an SVG, as noted at: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/SVG_Import it may be imported into OpenSCAD using the command: linear_extrude(height = 254, center = false) import(file = "L-00 Bridge V 11.19_profile.svg", center = false, dpi = 96); which imports as: [image] to make things a bit easier, we move it to the origin: [image] and export over the previous file. With a bit of experimentation …

to extrude the design:

which may then be imported