Male/Plug Inlay

[fenrus (Arjan van de Ven)]

Creating inlays using the new Carbide Create feature

In this tutorial I’ll be showing how to use the inlay feature in the latest Carbide Create (in beta at the time of writing). I’ll try to make this tutorial as detailed and entry level as possible (lots of pictures and small steps), if you’re a more advanced user this might be too boring for you. [pic2-endresult] Before you begin Unlike most other types of cuts, you need to plan ahead a bit more for your inlay. First, the tools you need; you need a V bit as well as a 1/8" or smaller regular …

has a full tutorial i wrote up… i used 0.2" as well so you can just use all values i used as is…