Manually editing tool paths?

[WillAdams (William Adams (Carbide 3D))]

Alternately, see using this technique to make full-blind box joints:

Full blind box joints in Carbide Create

The drawn-in rectangles indicate the material to be removed to define the pins of the joint: [image] and the cut through this is easily envisioned and drawn up by placing circles at each relevant point: [image] [image] [image] (using the Align tool to guide placement) [image] [image] [image] at which point the centers may be connected with a polyline: [image] [image] [image] [image] [image] which may then be duplicated [image] mirrored [image] and aligned: [im…