Modeling a specific profile

[WillAdams (William Adams (Carbide 3D))]

For a similar design from an STL see:

Making a wrist rest from an STL using two-sided machining

As requested on support… Given a stock size of: 15" x 4" with stock thickness of .75" and an STL: [image] which arguably requires two-sided machining: [image] We create such a file in Carbide Create: [image] Note that they Y-axis is twice the specified dimension and that the origin is set to “Center-Left” — this is to facilitate setting the job up as two-sided. [image] Each half will be used for the upper or lower part of the wrist rest.