Multiple controllers - 4th Axis

[tito (Bay Area and Sac, CA)]

Not a computer controlled 4th axis, but somewhere on here is Apollo’s jig for four-sided machining on the Nomad with the vise. Let’s see…

Ah ha! Here it is:

4 Sided Flip Frame Prototype

This is a design I made using Carbide Create for a 4 sided Jig that fits in the Carbide 3D Low profile vise channel, and allows 4 sided rotation. This design allows for a 3.25" long and 1.6" round part to be machined on 4 sides. [image] The Set screws that hold the stock conveniently sit inside the middle channel so if they stick out there is clearance. I have include the Carbide Create file below. Materials used: 2" x 2"x 5" aluminum tube with 3/16th walls. M6 Set screws 10mm- 16mm 1/8…