Greetings,
If you have been following this thread, a few days ago Phillipmcb reported that his
Vectric Aspire version 9.5 was error halting on loading when he tried to use my
post-processor I had developed for use with Vectric version 11 and 12.
I researched the issue and found that several commands and variable values
used by Vectric version 11 and later do not exist in version 9 and earlier.
Luckily I was able to find an older version of the Vectric editing guide on their forum
that I used to identify the differences. Also, Phillip agreed to do testing for me with
the modified version since version 11 was the oldest version I have.
So, that testing is done and have a working version of my post processor for
Vectric version 9.5, and earlier too hopefully, (the editing guide seems to suggest
it should work back to version 5 but I have no way to test and verify that).
Next issue was what to call/number it. I decided since it is a backwards compatible
version, to label it backwards alphabetically, so starting as version z.
For example, if you have a Spindle/VFD, my post-processor version 7g is now the
latest for use with Vectric version 12.5. Therefore my post-processor version
7z would support Vectric version 9.5. The README_FIRST file in the attached
zip file goes into more detailed description on the different versions for both
Trim Router and Spindle/VFD. The zip file contains a bundle of all the latest
versions.
Thanks again to Phillip for helping me out with version z development.
Best regards,
Allen
POSTP_6f-6z-7g-7z.zip (2.0 MB)