I wanted something to fancy up the table for Valentines Day dinner at home, so I made these quick napkin rings. Made from 0.3" thick maple engraved with a laser, cut out with a trusty 1/8" end mill, lightly sanded the edges and finished with cutting board conditioner (mineral oil). Looks good for less then an hour of work.
The hearts SVG was found on SVG Silh: https://svgsilh.com/image/598048.html
The font is Quindelia: https://www.1001fonts.com/quindelia-font.html and was engraved with a 4.2W diode laser with LightBurn (75ipm, 100% power, 0.0039" interval).
Valentines Napkin Rings.c2d (75.4 KB)