Reverse engrave text on acrylic in carbide create?

[abrackney (Adam Brackney)]

I’m engraving text on some clear acrylic, but I would like to be able to flip the text so that it is on the backside of the acrylic after the project is complete. Is there an option in Carbide create to invert or reverse text?

[abrackney (Adam Brackney)]

NEVERMIND. I’m a huge dummy. Found it.

[WillAdams (William Adams (Carbide 3D))]

Please see: https://wiki.shapeoko.com/index.php/Carbide_Create_Basics#Clearing_area_around_drawing for a possible improvement on this.

See instead:

Pocket carving around letters for raised effect

Hello all, I am new at all of this but gaining quickly thanks to the expert advice on this forum. My quest for today is to learn how to create this effect on HDU or similar material. [image] I would like to have a raised border & graphics on a recessed background. And, then to make matters even more complicated, is it possible to shape the raised graphics with a V bit? Please reference a tutorial if possible. Thank you! Don

and

Can't figure out how to fix the rounded corners on the preview when doing V carving

Here: [image] which appears as: [image] Select the letterform and inset it twice by a distance less than the diameter of the endmill: [image] resulting in: [image] which when toolpaths are assigned previews as: [image] Attached. W.c2d (91.4 KB)

For a discussion of clearing the interior see:

V carve + inside pocket?

I’m trying to understand how to use V carve along with a pocketing operation. For example I am wanting to V carve an entire sign but there are large areas that need to be pocketed, would I simply V carve along the lines and then perform an inside pocket after a tool change to a flat in endmill on the inside of the pocket area?