I’m selling my Shapeoko 5 Pro 4x4 as a complete, ready-to-run setup. I’d prefer to sell everything together rather than part it out.
Asking $4,750 OBO
Located in the Portland, Oregon area. Local pickup only due to the size of the machine and workstation.
The machine is fully operational and homing correctly and can be demonstrated for a serious buyer before purchase.
Shapeoko / CNC
- Shapeoko 5 Pro 4x4
- VFD spindle with ER16 collet system
- Carbide 3D BitZero V2
- Carbide 3D BitSetter
- Sweepy dust shoe / dust collection setup
- MDF work surface/slats
- Assorted cutters/bits
- Workholding clamps and hardware
- Collet/tooling accessories
- Wrenches, hex keys and other CNC tools
- Spindle tramming/alignment gauge and shims
- Assorted spare/replacement hardware and parts
Dedicated CNC computer
The computer and touchscreen are included, so the buyer doesn’t need to set up another PC just to get the machine running.
- MINIX Z100-0dB fanless mini PC
- ASUS VT168HR 15.6” touchscreen
- HUANUO articulating/gas-spring monitor arm
- HumanCentric mini-PC mounting bracket
- iPazzPort wireless mini keyboard/controller
- Carbide Motion installed
Dust collection
- DeWalt shop vacuum
- Dust hose
- Sweepy dust collection hardware
Custom workstation
The Shapeoko is mounted on a purpose-built workstation measuring approximately 68”W × 60”D × 29”H.
- Locking/leveling casters
- Soft-close storage drawers
- Lower storage area
- Integrated power strip — the equipment plugs into the workstation and the workstation plugs into the wall
- Mounted safety quick-stop / emergency-stop switch
- Touchscreen/computer mounted directly to the workstation
There is a lot of storage for cutters, clamps, spare parts and accessories, so this is essentially a self-contained CNC station.
I’m also including the complete original head/Z-axis assembly that was removed from the machine.
Why I’m selling it as a package
This isn’t just the bare Shapeoko. The idea is that someone can take home the machine, VFD spindle, probing/tool-setting hardware, computer and touchscreen, dust collection, custom workstation, tooling, workholding and spare parts and have essentially everything needed for a complete CNC workstation.
Asking $4,750 OBO.
Portland, Oregon area — local pickup.
I’m happy to demonstrate the machine operating for a serious buyer. Feel free to PM me with questions